Forged Shaft Material
- Monel, Inconel, Hastelloy
- Alloy 20
- Duplex, Super Duplex
- Titanium
- SMO 254
- 17-4 PH, 15-5 PH
- Nitronic 50, Nitronic 60
- Tantalum
- Nimonic 80A, 75, 90
- kanakratnasteelage@hotmail.com
- +(91)-9833663111
Get Forged Shaft Manufacturer in India, delivering materials with superior resistance and reliability.
Forged Shaft Overview
| Crank Shaft Type | Overall Length (mm) | Pin Journal Diameter (mm) | Main Journal Diameter (mm) | Stroke Length (mm) | Weight (kg) |
|---|---|---|---|---|---|
| Single Cylinder | 350 | 38 | 45 | 90 | 18 |
| Two Cylinder | 520 | 45 | 55 | 110 | 32 |
| Four Cylinder | 680 | 52 | 65 | 130 | 55 |
| Six Cylinder | 920 | 60 | 75 | 150 | 85 |
ASTM A276 TP 304 Forged Flange Shafts
Duplex 2205 Forged Hollow Shaft
ASTM A276 Grade 304 Forged Step Shaft
Table Of Content
ASTM A276 UNS S32750 Forged Flange Shafts Sizes
ASTM A276 Type 316L Hollow Shaft Forging Testing
Stainless Steel 316 Forged Stepped Shafts Capability
Super Duplex 2507 Cold Forged Shaft Finish
ASTM B446 UNS N06625 Forged Axle Shafts Process
WNR 2.4856 Forged Eccentric Shaft Services
ASTM A276 TP 316 Hot Forged Shaft Marking
Why Kanakratna For ASTM A276 Grade 316L Forged Shaft ?
Alloy C276 Forged Steel Shaft Packaging
Stainless Steel 304 Forged Shaft Benefits
ASTM A276 Gr 316L Forged Rotor Shaft Application
ASTM A276 Gr 316 Forged Shaft Origin
Get Forged Shaft Supplier in India for robust, high-end industrial materials
Reliable Forged Shaft Supplier in India, ensuring strict testing and quality checks
| Nominal Shaft Diameter (inches) | Minimum Hardness Depth (inches) | Class N Diameter Tolerance (inches) | Class S Diameter Tolerance (inches) | Class L Diameter Tolerance (inches) |
|---|---|---|---|---|
| 0.375 | 0.027 | .3750/.3748 | .3740/.3735 | .3745/.3740 |
| 0.250 | 0.027 | .2500/.2498 | .2490/.2485 | .2495/.2490 |
| 0.500 | 0.040 | .5000/.4998 | .4990/.4985 | 4995/.4990 |
| 0.750 | 0.060 | .7500/.7498 | .7490/.7485 | .7495/.7490 |
| 0.625 | 0.040 | .6250/.6248 | ..6240/.6235 | 6245/.6240 |
| 1.000 | 0.080 | 1.0000/.9998 | .9990/.9985 | .9995/.9990 |
| 1.500 | 0.080 | 1.5000/1.4997 | 1.4989/1.4984 | 1.4994/1.4989 |
| 1.250 | 0.080 | 1.2500/1.2498 | 1.2490/1.2485 | 1.2495/1.2490 |
| 2.000 | 0.100 | 2.0000/1.9997 | 1.9987/1.9980 | 1.9994/1.9987 |
Check Forged Shaft Manufacturer in India, delivering products that comply with industry standards
| Grades | Standards |
|---|---|
| SS 304/304L | ASTM A276/ ASTM A182/ ASTM A240/ ASTM A479 |
| SS 316/316L | ASTM A182/ ASTM A276/ ASTM A479/ASTM A240 |
| 347H | ASTM A182, ASTM A479 |
| SS 321 | ASTM A182/ ASTM A276/ASTM A240 |
| SS 310 | ASTM A240 A182, A276, A479 |
| SS 316TI | ASTM A479, ASTM A240, A276 |
| SS 431 | ASTM A 276, A479 |
| SS 410 | ASTM A276/ ASTM A479 |
| 317 & 317L | A182, A276 |
| SS 420 | ASTM A276, ASTM A479 |
| 416 | A582 |
| 904L | A182 |
| 430 | A582 |
| INCONEL 625 | ASTM B 564, ASTM B446 |
| INCONEL 718 | ASTM B 637 |
| INCONEL 617 | SASTM B166 |
| Inconel 825 | B564, B425 |
| Inconel 600 | B168, B564 |
| Inconel 800 | B564, B425 |
| S21800 (Nitronic 60) | A276, ASTM A479 |
| S20910 (Nitronic 50) | A276, ASTM A479 |
| S31803 | ASTM A276/ ASTM A182/ ASTM A240/ ASTM A479 |
| S32750 | ASTM A276/ ASTM A182/ ASTM A240/ ASTM A479 |
| S32760 | ASTM A276/ ASTM A182/ ASTM A240/ ASTM A479 |
| 2205 | ASTM A240/ ASTM A276/ ASTM A789/ ASTM A790/ EN10088-2 |
| S32550 | ASTM A182/ ASTM A276/ ASTM A479 |
| 17.4 PH | ASTM A 564 |
| Gr. 91 | ASTM A 387 |
| Gr.11 | ASTM A387 |
| F91 | ASTM A182 |
| Gr. 70 | ASTM A516 |
| B22 | ASTM A739 |
| A105 | ASTM A105 |
| B11 | ASTM A739 |
| F22CL3 | ASTM A182 |
| EN24/EN24T | BS 970 |
| F11 CL2 | ASTM A182 |
| 4140 | ASTM A322 |
| 13CrMo4-5 | EN10028-2/ EN10216-2/ DIN 17155/ASTM A335 |
| A36 | ASTM A36 |
| F6NM | ASTM A182 |
| SS 420HC | ASTM A276 |
| IS 2062 | IS2062 |
| N02200 | ASTM B 160 |
| S235JR | IS2062 |
| 15.5 PH | A564 |
| Gr. 22 | ASTM A 387 |
| Hastelloy B2 | B564 |
| HASTALLOY C276 | ASTM B574 |
| HASTALLOY C22 | ASTM B574 |
| Hastelloy B & C | B564, B425 |
| MONEL K400 | ASTM B 164, ASTM B564 |
| N08020 (Alloy 20) | ASTM B473 |
| MONEL K500 | ASTM B 865 |
| Titanium GR. 2 | B348, B381 |
| Titanium GR. 5 | B348 |
| Maraging 250 | AMS 6512 |
| Maraging 350 | AMS 6515 |
| Maraging 300 | AMS 6514, ASTM A579 |
| F5 | A182 |
| D2 | A439 |
| 4340 | A322 |
| 4130 | A322 |
| EN8 | BS 970 |
| EN19 | BS 970 |
| C45 | EN10250 |
| 1010 | A576, A108, A29 |
| 1020 | A576, A108, A29 |
| P91 | ASTM A335/ ASTM A213/ ASTM A182/ ASTM A387 |
| 440C | A276 |
| 1040 | A576, A108, A29 |
| 1018 | A576, A108, A29 |
Alloy 625 Forged Crank Shafts
ASTM A276 Type 316 Forged Rotor Shaft
Alloy 825 Forged Gear Shafts
ASTM A276 UNS S32205 Forged Eccentric Shaft
ASTM B408 UNS N08800 Forged Axle Shafts
Incoloy 800 Forged Linear Shaft
ASTM B425 UNS N08825 Hot Forged Shaft
WNR 2.4858 PSQ Shaft
ASTM B160 UNS N02200 Turned Ground and Polished Shafting
| Heat Treatment | Temperature (°C) |
|---|---|
| Annealing | 650 - 750 |
| Normalizing | 850 - 900 |
| Hardening | 800 - 880 |
Trusted Forged Shaft Stockist in India with proven manufacturing processes
Global Forged Shaft Stockist in India delivering cutting-edge solutions with enhanced properties
| Material grade | Heat treatment | Blank diameter | Hardness | Tensile strength limit σb | Bending fatigue limit σ-1 | Shear fatigue limit τ-1 | Allowable bending stress[σ-1] |
|---|---|---|---|---|---|---|---|
| （mm） | (HBS) | ||||||
| Q235A | Hot Rolled Or Air Cooled After Forging | ≤100 | 400-420 | 170 | 105 | 40 | |
| >100-250 | 375-390 | ||||||
| 20Cr | Carburization | ≤60 | Carburization | 640 | 305 | 160 | 60 |
| Quench | 56-62HRC | ||||||
| Tempering | |||||||
| 3Cr13 | Tempering | ≤100 | ≥241 | 835 | 395 | 230 | 75 |
| 1Cr18Ni9Ti | Quench | ≤100 | ≤192 | 530 | 190 | 115 | 45 |
| 180 | 110 | ||||||
| 100-200 | 490 | ||||||
| 45# | Normalizing | ≤10 | 170-217 | 590 | 225 | 140 | 55 |
| Tempering | >100-300 | 162-217 | 570 | 245 | 135 | ||
| Tempering | ≤200 | 217-255 | 640 | 275 | 155 | 60 | |
| 40Cr | Tempering | ≤100 | 241-286 | 735 | 355 | 200 | 70 |
| >100-300 | 685 | 355 | 185 | ||||
| 40CrNi | Tempering | ≤100 | 270-300 | 900 | 430 | 260 | 75 |
| >100-300 | 240-270 | 785 | 370 | 210 | |||
| 38SiMnMo | Tempering | ≤100 | 229-286 | 735 | 365 | 210 | 70 |
| >100-300 | 217-269 | 685 | 345 | 195 | |||
| 38CrMoAlA | Tempering | ≤60 | 293-321 | 930 | 440 | 280 | 75 |
| >60-100 | 277-302 | 835 | 410 | 270 | |||
| >100-160 | 241-277 | 785 | 375 | 220 | |||
| QT600-3 | - | - | 190-270 | 600 | 215 | 185 | - |
| QT800-2 | 245-335 | 800 | 290 | 250 |
| Sampling Location | Rp0.2/MPa | Rm/MPa | A/% | Z/% | 0 °C/KV | HBW | |
|---|---|---|---|---|---|---|---|
| Riser | 90 ° tangential | 360 | 612 | 30.5 | 63 | 69、71、48， | 195 |
| 270 ° axial | 364 | 615 | 31.5 | 59.5 | 63、63、51 | 189 | |
| Water inlet | 0 ° tangential | 373 | 631 | 31 | 61.5 | 51、40、41 | 191 |
| 180 ° axial | 369 | 629 | 26.5 | 58 | 63、58、45 | 188 | |
| Surface Finish | Surface Quality | |
|---|---|---|
| MF | Machined Finish | Ra 1.6 - 3.2 µm |
| MLF | Milled Finish | Ra 3.2 - 6.3 µm |
| GF | Ground Finish | Ra 0.4 - 1.6 µm |
| HF | Honed Finish | Ra 0.2 - 0.8 µm |
| PF | Polished Finish | Ra 0.05 - 0.4 µm |
| SF | Shot Blasted / Satin Finish | Ra 3 - 8 µm |
| Metal or Alloys | Temperature Range (°C) |
|---|---|
| Carbon and Low-alloy steels | 850 - 1150 |
| Martensitic stainless steels | 1100 - 1250 |
| Magnesium alloys | 250 - 350 |
| Copper alloys | 600 - 900 |
| Tantalum alloys | 1050 - 1350 |
| Molybdenum alloys | 1150 - 1350 |
| Nickel-base superalloys | 1050 - 1200 |
| Austenitic stainless steels | 1100 - 1250 |
| Titanium alloys | 700 - 950 |
| Iron-base superalloys | 1050 - 1180 |
| Cobalt-base superalloys | 1180 - 1250 |
| Aluminum alloys | 400 - 550 |
| Tungsten alloys | 1200 - 1300 |
| Ras Al Khaimah | Muscat | Riyadh | Dubai |
|---|---|---|---|
| Doha | Sharjah | Fujairah | Armenia |
| Ajman | Saudi Arabia | Al Jubail | Al Khobar/ Abu Dhabi |
| Export to | Shipping Time in Days | Export to | Shipping Time in Days | Export to | Shipping Time in Days |
|---|---|---|---|---|---|
 Singapore |
8 |  Lebanon |
14 |  Netherlands |
8 |
 Oman |
5 |  Iraq |
12 |  UAE |
5 |
 Tunisia |
18 |  Vietnam |
10 |  Thailand |
10 |
 Qatar |
6 |  New Zealand |
25 |  Philippines |
12 |
 Indonesia |
9 |  Australia |
20 |  Nigeria |
9 |
 Kenya |
19 |  Cyprus |
16 |  Europe |
19 |
 Russia |
22 |  Tanzania |
18 |  Algeria |
17 |
