As a leading Inconel Fasteners Manufacturer in India, we provide products with superior resistance in extreme environments.
Inconel Fasteners Snapshot
| Grades | Trade Names | Alloy type |
|---|---|---|
| Inconel 600® | Nickelvac® 600, Ferrochronin® 600 | Nickel-Chromium-Iron |
| Inconel 601® | Pyromet® 601, Nicrofer® 601 | Nickel-Chromium-Iron |
| Inconel 617® | Nicrofer® 617 | Nickel-Chromium-Cobalt |
| Inconel 625® | Chornin® 625, Altemp® 625, Nickelvac® 625, Haynes® 625 Nicrofer® 6020 | Nickel-Chromium-Iron |
| Inconel 718® | Nicrofer® 5219, Alvac® 718, Haynes® 718, Altemp® 718 | Nickel-Chromium-Iron |
| Inconel X750® | Haynes X750®, Pyromet® X750, Nickelvac®X750, Nicorros® 7016 | Nickel-Chromium-Iron |
Inconel Bolts
Inconel Alloy Stud Bolt
Inconel Material Screws
Table Of Content
Inconel Fasteners Sizes
Inconel Threaded Rod Threads
Inconel Alloy Screw Head
Inconel Material Bolts Thread
Inconel Metal Studs Type
Inconel Bolts Neck Type
Inconel Alloy Screw Tip Style
Inconel Material Studs End
Inconel Flat Washers Physical Properties
Inconel Fasteners Types
Inconel Screws Origin
Inconel Threaded Rod Finish
Inconel Bolts Process
Inconel Nuts Marking
Inconel Threaded Rod Conditon
Inconel Washers Application
Inconel Dowel Pins Packaging
Thread Pitch Of Inconel Screw
As a trusted Inconel Fasteners supplier in India, we ensure top-quality products and consistent performance for critical applications.
| Nominal Diameter | E Body DiameterMax | H Head HeightBasic | F Width Across FlatsBasic | G Width Across CornersMax |
|---|---|---|---|---|
| 3/8 | 0.388 | 1/4 | 11/16 | 0.794 |
| 1/2 | 0.515 | 11/32 | 7/8 | 1.010 |
| 5/8 | 0.642 | 27/64 | 1-1/16 | 1.227 |
| 3/4 | 0.768 | 1/2 | 1-1/4 | 1.443 |
| 7/8 | 0.896 | 37/64 | 1-7/16 | 1.660 |
| 1 | 1.022 | 43/64 | 1-5/8 | 1.876 |
| 1-1/8 | 1.149 | 3/4 | 1-13/16 | 2.093 |
| 1-1/4 | 1.277 | 27/32 | 2 | 2.309 |
| 1-3/8 | 1.404 | 29/32 | 2-3/16 | 2.526 |
| 1-1/2 | 1.531 | 1 | 2-3/8 | 2.742 |
| 1-5/8 | 1.658 | 1-3/32 | 2-9/16 | 2.959 |
| 1-3/4 | 1.785 | 1-5/32 | 2-3/4 | 3.175 |
| 1-7/8 | 1.912 | 1-1/4 | 2-15/16 | 3.392 |
| 2-1/4 | 2.305 | 1-1/2 | 3-1/2 | 4.041 |
| 2-1/2 | 2.559 | 1-21/32 | 3-7/8 | 4.474 |
| 2-3/4 | 2.827 | 1-13/16 | 4-1/4 | 4.907 |
| 3 | 3.081 | 2 | 4-3/8 | 5.340 |
| 2 | 2.039 | 1-11/32 | 3-1/4 | 3.608 |
| Nominal Size | Basic Major Diameter of Thread | F | H | G | |||
|---|---|---|---|---|---|---|---|
| Width Across Flats | Thickness Hex Nuts | Width Across Corners | |||||
| Min | Max | Min | Max | Min | Max | ||
| 1/2 | 0.5000 | 0.736 | 0.750 | 0.427 | 0.448 | 0.840 | 0.866 |
| 9/16 | 0.5625 | 0.861 | 0.875 | 0.473 | 0.496 | 0.982 | 1.010 |
| 5/8 | 0.6250 | 0.922 | 0.938 | 0.535 | 0.559 | 1.051 | 1.083 |
| 3/4 | 0.7500 | 1.088 | 1.125 | 0.617 | 0.665 | 1.240 | 1.299 |
| 7/8 | 0.8750 | 1.269 | 1.312 | 0.724 | 0.776 | 1.447 | 1.516 |
| 1 | 1.0000 | 1.450 | 1.500 | 0.831 | 0.887 | 1.653 | 1.732 |
| 1/4 | 0.2500 | 0.428 | 0.438 | 0.212 | 0.226 | 0.488 | 0.505 |
| 5/16 | 0.3125 | 0.489 | 0.500 | 0.258 | 0.273 | 0.557 | 0.577 |
| 3/8 | 0.3750 | 0.551 | 0.563 | 0.320 | 0.337 | 0.628 | 0.650 |
| 7/16 | 0.4375 | 0.675 | 0.688 | 0.365 | 0.385 | 0.768 | 0.794 |
| 1-3/4 | 1.7500 | 2.538 | 2.625 | 1.460 | 1.540 | 2.893 | 3.031 |
| 1-1/8 | 1.1250 | 1.631 | 1.688 | 0.939 | 0.999 | 1.859 | 1.949 |
| 1-1/4 | 1.2500 | 1.812 | 1.875 | 1.030 | 1.094 | 2.066 | 2.165 |
| 1-3/8 | 1.3750 | 1.994 | 2.062 | 1.138 | 1.206 | 2.273 | 2.382 |
| 1-1/2 | 1.5000 | 2.175 | 2.250 | 1.245 | 1.317 | 2.480 | 2.598 |
| 1-5/8 | 1.6250 | 2.35 | 2.43 | 1.364 | 1.416 | 2.679 | 2.805 |
| 1-7/8 | 1.8750 | 2.722 | 2.813 | 1.567 | 1.651 | 3.103 | 3.247 |
| 2 | 2.0000 | 2.900 | 3.0000 | 1.675 | 1.763 | 3.306 | 3.464 |
| 2-1/4 | 2.2500 | 3.263 | 3.375 | 1.890 | 1.986 | 3.719 | 3.897 |
| 2-1/2 | 2.500 | 3.625 | 3.750 | 2.105 | 2.209 | 4.133 | 4.330 |
| 2-3/4 | 2.7500 | 3.988 | 4.125 | 2.319 | 2.431 | 4.546 | 4.763 |
| Nominal Washer Size | Max OD, B | ID, A | Min Mean Section Thickness (ti + to)/2, T | Min Bearing Width, BW | Min Section Width, W | |
|---|---|---|---|---|---|---|
| Max. | Min. | |||||
| 1/4 (0.250) | 0.487 | 0.260 | 0.252 | 0.062 | 0.076 | 0.109 |
| 5/16 (0.3125) | 0.583 | 0.322 | 0.314 | 0.078 | 0.087 | 0.125 |
| 3/8 (0.375) | 0.680 | 0.385 | 0.377 | 0.094 | 0.099 | 0.141 |
| 7/16 (0.4375) | 0.776 | 0.450 | 0.440 | 0.109 | 0.109 | 0.156 |
| 1/2 (0.500) | 0.869 | 0.512 | 0.502 | 0.125 | 0.120 | 0.171 |
| 9/16 (0.5625) | 0.965 | 0.574 | 0.564 | 0.141 | 0.132 | 0.188 |
| 5/8 (0.625) | 1.073 | 0.641 | 0.628 | 0.156 | 0.142 | 0.203 |
| 11/16 (0.6875) | 1.170 | 0.704 | 0.691 | 0.172 | 0.153 | 0.219 |
| 3/4 (0.750) | 1.265 | 0.766 | 0.753 | 0.188 | 0.164 | 0.234 |
| #2 (0.086) | 0.172 | 0.094 | 0.088 | 0.020 | 0.024 | 0.035 |
| #3 (0.099) | 0.195 | 0.107 | 0.101 | 0.025 | 0.028 | 0.040 |
| #4 (0.112) | 0.209 | 0.120 | 0.114 | 0.025 | 0.028 | 0.040 |
| #5 (0.125) | 0.236 | 0.133 | 0.127 | 0.031 | 0.033 | 0.047 |
| #6 (0.138) | 0.250 | 0.148 | 0.141 | 0.031 | 0.033 | 0.047 |
| #8 (0.164) | 0.293 | 0.174 | 0.167 | 0.040 | 0.038 | 0.055 |
| #10 (0.190) | 0.334 | 0.200 | 0.193 | 0.047 | 0.043 | 0.062 |
| #12 (0.216) | 0.377 | 0.227 | 0.220 | 0.056 | 0.049 | 0.070 |
| 13/16 (0.6875) | 1.363 | 0.832 | 0.816 | 0.203 | 0.175 | 0.250 |
| Material Grade | ASME Section | Max Temp (°F) | Code |
|---|---|---|---|
| Grade 1 | Section VIII, Div 1 | Up to 1200°F | Table 1B, ASME Sec II, Part D |
| Grade 1 | Section III, Class 2 & 3 | Up to 800°F | Table 1B, ASME Sec II, Part D |
| Grade 1 | Section III, Class 1 | - | Table 2B, ASME Sec II, Part D |
| Grade 1 | Section I | Up to 1100°F | ASME Code Case 1935 |
| Grade 2 | Section VIII, Div 1 | Up to 1600°F | Table 1B, ASME Sec II, Part D |
Inconel Nut
Inconel Alloy Threaded Rod
Inconel Material Dowel Pin
Inconel Metal Rivet
Inconel Hex Bolts
Inconel Alloy U Bolts
Inconel Material Washer
Inconel Metal Anchor Bolts
Inconel Wing Nut
Inconel Alloy J-Bolts
Inconel Material Coupling Nut
Inconel Metal Eye Bolt
Inconel Hex Nut
Inconel Alloy Lock Nuts
Inconel Material Socket Head Cap Screw
| Diameter | Length |
|---|---|
| 1” | 5” - 5 1/2" |
| 1 1/8” | 6” - 6 1/2" |
| 1 1/4" | 7” - 7 1/2" |
| 1/2" | 1 1/2" - 1 3/4" |
| 5/8” | 2” - 2 3/4" |
| 3/4" | 3” - 3 3/4" |
| 7/8” | 4” - 4 1/2” |
Established Inconel Fasteners Supplier of reliable goods tailored for harsh industrial applications.
| Hexagon Bolts / Set Screws | Stud Bolts | Socket Cap screws | Hexagon Nuts |
|---|---|---|---|
| DIN 931 | BS4882 | DIN 912 | DIN 934 |
| DIN 933 | DIN 976 | DIN 6912 | BS 1768 |
| ISO 4014 | - | UNI 5931 | ISO 4032 |
| ISO 4017 | - | BS 2470 | ISO 4033 |
| UNI 5731 | - | ANSI B18.3 | BS 1083 |
| UNI 5739 | - | ISO 4762 | BS 3692 |
| BS 1769 | - | BS 4168 | ANSI B18.2.2 |
| BS 1768 | - | DIN 7984 | BS 1769 |
| BS 3692 | - | - | - |
| ANSI B18.2.1 | - | - |
| Socket & Slotted Set Screws | Washers | Studs | Socket & Slotted Countersunk Screws |
|---|---|---|---|
| DIN 913 | DIN 125 | DIN 938 | DIN 963 |
| DIN 914 | DIN 9021 | DIN 939 | DIN 7991 |
| DIN 915 | BS 4320 | DIN 2510 | BS 4168 |
| DIN 916 | BS 3410 | BS 4439 | BS 1981 |
| DIN 551 | - | BS 2693 | BS 483 |
| DIN 553 | - | - | BS 2470 |
| DIN 438 | DIN 127 | - | - |
| BS 4168 | BS 4464 | - | - |
| - | BS 1802 | - | - |
A top-tier Inconel Fasteners Supplier committed to quality assurance and long-term product value.
| Nominal Diameter | Torque ft-lb | Torque ft-lb | Threads |
|---|---|---|---|
| Inches | Dry | Lubricated | Inches |
| 3/8" | 12.4 To 14.1 | 9.3 To 10.5 | 16 To 24 |
| 1/2" | 30.3 To 34.2 | 22.7 To 25.6 | 13 To 20 |
| 1/4" | 3.4 To 3.9 | 2.5 To 2.9 | 20 To 28 |
| 5/8" | 60.4 To 68.4 | 45.3 To 51.3 | 11 To 18 |
| 3/4" | 107 To 119 | 80 To 90 | 10 To 16 |
| 5/16" | 7.0 To 7.8 | 5.3 To 5.8 | 18 To 24 |
| 7/16" | 19.9 To 22.2 | 14.9 To 16.7 | 14 To 20 |
| 9/16" | 43.7 To 48.8 | 32.8 To 36.6 | 12 To 18 |
| 7/8" | 173 To 191 | 130 To 143 | 9 To 14 |
| 1" | 259 To 290 | 194 To 218 | 8 To 14 |
| 1 To 1/4" | 451 To 499 | 338 To 374 | 7 To 12 |
| 1 To 1/2" | 784 To 882 | 588 To 662 | 6 To 12 |
Are You Looking for the Most Recent Price on Inconel Fasteners?? Click Here
| Stud Bolt Size | Length of Stud Bolts | ||||||
|---|---|---|---|---|---|---|---|
| NPS | Outside Dia of Flange | The Dia of Bolt Circle | Dia of Bolts | The Dia of Bolt Holes | Number of Bolts | Ring Joint | Raised Face 0.06 in |
| 1/2 | 3 1/2 | 2 3/8 | 1/2 | 5/8 | 4 | - | 2 1/4 |
| 1 | 4 1/4 | 3 1/8 | 1/2 | 5/8 | 4 | 3 | 2 1/2 |
| 2 1/2 | 7 | 5 1/2 | 5/8 | 3/4 | 4 | 4 | 3 1/2 |
| 1 1/4 | 4 5/8 | 3 1/2 | 1/2 | 5/8 | 4 | 3 1/4 | 2 3/4 |
| 2 | 6 | 4 3/4 | 5/8 | 3/4 | 4 | 3 3/4 | 3 1/4 |
| 3 1/2 | 8 1/2 | 7 | 5/8 | 3/4 | 8 | 4 | 3 1/2 |
| 24 | 32 | 29 1/2 | 1 1/4 | 1 1/4 | 20 | 7 1/4 | 6 3/4 |
| 5 | 10 | 8 1/2 | 3/4 | 7/8 | 8 | 4 1/4 | 3 3/4 |
| 8 | 13 1/2 | 11 3/4 | 3/4 | 7/8 | 8 | 4 3/4 | 4 1/4 |
| 3 | 7 1/2 | 6 | 5/8 | 3/4 | 4 | 4 | 3 1/2 |
| 4 | 9 | 7 1/2 | 5/8 | 3/4 | 8 | 4 | 3 1/2 |
| 6 | 11 | 9 1/2 | 3/4 | 7/8 | 8 | 4 1/2 | 4 |
| 12 | 19 | 17 | 7/8 | 1 | 12 | 5 1/4 | 4 3/4 |
| 18 | 25 | 22 3/4 | 1 1/8 | 1 1/4 | 16 | 6 1/4 | 5 3/4 |
| 16 | 23 1/2 | 21 1/4 | 1 | 1 1/8 | 16 | 5 3/4 | 5 1/4 |
| 10 | 16 | 14 3/4 | 7/8 | 1 | 12 | 5 | 4 1/2 |
| 14 | 21 | 18 3/4 | 1 | 1 1/8 | 12 | 5 3/4 | 5 1/4 |
| 1 1/2 | 5 | 3 7/8 | 1/2 | 5/8 | 4 | 3 1/4 | 2 3/4 |
| 20 | 27 1/2 | 25 | 1 1/8 | 1 1/4 | 20 | 6 3/4 | 6 1/4 |
| Nominal Size | Diameter, D | Threads Per Inch | Umax = 2 Thread Pitches = 2P | ||||
|---|---|---|---|---|---|---|---|
| UNC | UNF | 8UN | UNC Threads | UNF Threads | 8UN Threads | ||
| 1 1/8 | 1.1250 | 7 | 12 | 8 | 0.286 | 0.167 | 0.250 |
| 1 3/4 | 0.1750 | 5 | - | 8 | 0.400 | - | 0.250 |
| 1 7/8 | 1.8750 | - | - | 8 | - | - | 0.250 |
| 2 | 2.0000 | 4 1/2 | - | 8 | 0.444 | - | 0.250 |
| 3 1/4 | 3.2500 | 4 | - | 8 | 0.500 | - | 0.250 |
| 5/8 | 0.6250 | 11 | 18 | - | 0.182 | 0.111 | - |
| 3/4 | 0.7500 | 10 | 16 | - | 0.200 | 0.125 | - |
| 7/8 | 0.8750 | 9 | 14 | - | 0.222 | 0.143 | - |
| 1 | 1.0000 | 8 | 12 | - | 0.250 | 0.167 | - |
| 3 1/2 | 3.5000 | 4 | - | 8 | 0.500 | - | 0.250 |
| 3 3/4 | 3.7500 | 4 | - | 8 | 0.500 | - | 0.250 |
| 2 1/4 | 2.2500 | 4 1/2 | - | 8 | 0.444 | - | 0.250 |
| 2 1/2 | 2.5000 | 4 | - | 8 | 0.500 | - | 0.250 |
| 2 3/4 | 2.7500 | 4 | - | 8 | 0.500 | - | 0.250 |
| 3 | 3.0000 | 4 | - | 8 | 0.500 | - | 0.250 |
| 1 1/4 | 1.2500 | 7 | 12 | 8 | 0.286 | 0.167 | 0.250 |
| 1 3/8 | 1.3750 | 6 | 12 | 8 | 0.333 | 0.167 | 0.250 |
| 1 1/2 | 1.5000 | 6 | 12 | 8 | 0.333 | 0.167 | 0.250 |
| 1 5/8 | 1.6250 | - | - | 8 | - | - | 0.250 |
| 1/4 | 0.2500 | 20 | 28 | - | 0.100 | 0.071 | - |
| 5/16 | 0.3125 | 18 | 24 | - | 0.111 | 0.083 | - |
| 3/8 | 0.3750 | 16 | 24 | - | 0.125 | 0.083 | - |
| 7/16 | 0.4375 | 14 | 20 | - | 0.143 | 0.100 | - |
| 1/2 | 0.5000 | 13 | 20 | - | 0.154 | 0.100 | - |
| 9/16 | 0.5625 | 12 | 18 | - | 0.167 | 0.111 | - |
| Weight (per kg) | |||||||
|---|---|---|---|---|---|---|---|
| Length | Diameter | ||||||
| M 10 | M 8 | M 14 | M 6 | M 5 | M 18 | M 22 | |
| 16 mm | 3.211 | 1.590 | - | 0.743 | 0.448 | - | - |
| 20 mm | 3.411 | 1.711 | - | 0.812 | 0.598 | - | - |
| 25 mm | 3.660 | 1.871 | 8.170 | 0.897 | 0.660 | - | - |
| 40 mm | 4.533 | 2.470 | 10.288 | 1.230 | 0.881 | 16.667 | - |
| 45 mm | 4.840 | 2.671 | 10.504 | 1.340 | 0.958 | 17.241 | - |
| 30 mm | 3.912 | 2.070 | 9.690 | 1.010 | 0.737 | - | - |
| 35 mm | 4.223 | 2.271 | 10.000 | 1.120 | 0.804 | 16.026 | - |
| 50 mm | 5.155 | 2.870 | 11.261 | 1.450 | 1.030 | 17.857 | 28.409 |
| 55 mm | 5.464 | 3.071 | 11.628 | 1.560 | - | 18.868 | 30.120 |
| 60 mm | 5.774 | 3.270 | 12.255 | 1.670 | - | 20.000 | 32.051 |
| 65 mm | 6.083 | 3.472 | 12.626 | 1.781 | - | 21.008 | 34.014 |
| 70 mm | 6.394 | 3.671 | 12.987 | 1.890 | - | 22.124 | 35.461 |
| 75 mm | 6.702 | 3.873 | 13.228 | 2.000 | - | 23.256 | 39.063 |
| 80 mm | 7.013 | 4.072 | 13.889 | 2.111 | - | 24.510 | 40.000 |
| 90 mm | 7.634 | 4.472 | 14.925 | - | - | 26.042 | 41.667 |
| 100 mm | 8.251 | 4.873 | 16.340 | - | - | 27.778 | 46.296 |
| 110 mm | 8.881 | - | 17.730 | - | - | 31.250 | 47.170 |
| 120 mm | 9.506 | - | 18.797 | - | - | 32.895 | 50.000 |
| 130 mm | 10.101 | - | 20.000 | - | - | 34.722 | 52.632 |
| 140 mm | 10.707 | - | 20.833 | - | - | 35.461 | 55.556 |
| 150 mm | 11.312 | - | 22.222 | - | - | 37.594 | 58.824 |
| 160 mm | 11.905 | - | 24.272 | - | - | 40.984 | 61.728 |
| 170 mm | 12.500 | - | - | - | - | - | 64.935 |
| 190 mm | 13.736 | - | - | - | - | - | 70.423 |
| 180 mm | 13.123 | - | 26.882 | - | - | - | 67.568 |
| 200 mm | 14.327 | - | 29.586 | - | - | 49.020 | 73.529 |
| 220 mm | 15.528 | - | - | - | - | - | 79.365 |
| 240 mm | 16.722 | - | - | - | - | - | 84.746 |
| 250 mm | 17.301 | - | - | - | - | - | 87.719 |
| 260 mm | 17.921 | - | - | - | - | - | 90.909 |
| 280 mm | 19.157 | - | - | - | - | - | 98.039 |
Forward-thinking Inconel Fasteners Stockist with a track record of durable and efficient designs.
| Nominal Size (Basic Screw Diameter) | Head Diameter, A | Maximum Chamfer or Radius, C | Body Diameter, D | Head Height, H | Nominal Hexagon Socket Size, J | Maximum Chamfer or Radius, K | Nominal Spline Socket Size, M | Minimum Key Engagement, T | Minimum Wall Thickness, G | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max | Min | Max | Min | Max | Min | ||||||||
| 0 (0.0600) | 0.096 | 0.091 | 0.004 | 0.0600 | 0.0568 | 0.060 | 0.057 | - | 0.050 | 0.007 | 0.060 | 0.025 | 0.020 |
| 1 (0.0730) | 0.118 | 0.112 | 0.005 | 0.0730 | 0.0695 | 0.073 | 0.070 | 1/161/16 | 0.0620.062 | 0.007 | 0.072 | 0.031 | 0.025 |
| 2 (0.0860) | 0.140 | 0.134 | 0.008 | 0.0860 | 0.0822 | 0.086 | 0.083 | 5/64 | 0.078 | 0.007 | 0.096 | 0.038 | 0.029 |
| 3 (0.0990) | 0.161 | 0.154 | 0.008 | 0.0990 | 0.0949 | 0.099 | 0.095 | 5/64 | 0.078 | 0.007 | 0.096 | 0.044 | 0.034 |
| 4 (0.1120) | 0.183 | 0.176 | 0.009 | 0.1120 | 0.1075 | 0.112 | 0.108 | 3/32 | 0.094 | 0.008 | 0.111 | 0.051 | 0.038 |
| 5 (0.1250) | 0.205 | 0.198 | 0.012 | 0.1250 | 0.1202 | 0.125 | 0.121 | 3/32 | 0.094 | 0.008 | 0.111 | 0.057 | 0.043 |
| 6 (0.380) | 0.226 | 0.218 | 0.013 | 0.1380 | 0.1329 | 0.138 | 0.134 | 7/64 | 0.109 | 0.008 | 0.133 | 0.064 | 0.047 |
| 8 (0.1640) | 0.270 | 0.262 | 0.014 | 0.1640 | 0.1585 | 0.164 | 0.159 | 9/64 | 0.141 | 0.008 | 0.168 | 0.077 | 0.056 |
| 10 (0.1900) | 0.312 | 0.303 | 0.018 | 0.1900 | 0.1840 | 0.190 | 0.185 | 5/32 | 0.156 | 0.008 | 0.183 | 0.090 | 0.065 |
| 1/4 (0.2500) | 0.375 | 0.365 | 0.025 | 0.2500 | 0.2435 | 0.250 | 0.244 | 3/16 | 0.188 | 0.010 | 0.216 | 0.120 | 0.095 |
| 5/16 (0.3125) | 0.469 | 0.457 | 0.033 | 0.3125 | 0.3053 | 0.312 | 0.306 | 1/4 | 0.250 | 0.010 | 0.291 | 0.151 | 0.119 |
| 3/8 (0.3750) | 0.562 | 0.550 | 0.040 | 0.3750 | 0.3678 | 0.375 | 0.368 | 5/16 | 0.312 | 0.010 | 0.372 | 0.182 | 0.143 |
| 7/16 (0.4375) | 0.656 | 0.642 | 0.047 | 0.4375 | 0.4294 | 0.438 | 0.430 | 3/8 | 0.375 | 0.015 | 0.454 | 0.213 | 0.166 |
| 1/2 (0.5000) | 0.750 | 0.735 | 0.055 | 0.5000 | 0.4919 | 0.500 | 0.492 | 3/8 | 0.375 | 0.015 | 0.454 | 0.245 | 0.190 |
| 5/8 (0.6250) | 0.938 | 0.921 | 0.070 | 0.6250 | 0.6163 | 0.625 | 0.616 | 1/2 | 0.500 | 0.015 | 0.595 | 0.307 | 0.238 |
| 3/4 (0.7500) | 1.125 | 1.107 | 0.085 | 0.7500 | 0.7406 | 0.750 | 0.740 | 5/8 | 0.625 | 0.015 | 0.620 | 0.370 | 0.285 |
| 7/8 (0.8750) | 1.312 | 1.293 | 0.100 | 0.8750 | 0.8647 | 0.875 | 0.864 | 3/4 | 0.750 | 0.020 | 0.698 | 0.432 | 0.333 |
| 1 (1.0000) | 1.500 | 1.479 | 0.114 | 1.0000 | 0.9886 | 1.000 | 0.988 | 3/4 | 0.750 | 0.020 | 0.790 | 0.495 | 0.380 |
| 1-1/8 (1.1250) | 1.688 | 1.665 | 0.129 | 1.1250 | 1.1086 | 1.125 | 1.111 | 7/8 | 0.875 | 0.020 | - | 0.557 | 0.428 |
| 1-1/4 (1.2500) | 1.875 | 1.852 | 0.144 | 1.2500 | 1.2336 | 1.250 | 1.236 | 7/8 | 0.875 | 0.020 | - | 0.620 | 0.475 |
| 1-3/8 (1.3750) | 2.062 | 2.038 | 0.160 | 1.3750 | 1.3568 | 1.375 | 1.360 | 1 | 1.000 | 0.020 | - | 0.682 | 0.523 |
| 1-1/2 (1.5000) | 2.250 | 2.224 | 0.176 | 1.5000 | 1.4818 | 1.500 | 1.485 | 1 | 1.000 | 0.020 | - | 0.745 | 0.570 |
| 1-3/4 (1.7500) | 2.625 | 2.597 | 0.207 | 1.7500 | 1.7295 | 1.750 | 1.734 | 1-1/4 | 1.250 | 0.020 | - | 0.870 | 0.665 |
| 2 (2.000) | 3.000 | 2.970 | 0.238 | 2.000 | 1.9780 | 2.000 | 1.983 | 1-1/2 | 1.500 | 0.020 | - | 0.995 | 0.760 |
| Cold Reduction, % | Temperature Required for Recrystallization in | |||||||
|---|---|---|---|---|---|---|---|---|
| 15 min | 30 min | 60 min | 120 min | |||||
| °C | °F | °C | °F | °C | °F | °C | °F | |
| 5 | 968 | 1775 | 954 | 1750 | 927 | 1700 | 927 | 1700 |
| 10 | 899 | 1650 | 871 | 1600 | 843 | 1550 | 843 | 1550 |
| 20 | 829 | 1525 | 802 | 1475 | 774 | 1425 | 774 | 1425 |
| 50 | 732 | 1350 | 718 | 1325 | 691 | 1275 | 691 | 1275 |
| 80 | 677 | 1250 | 663 | 1225 | 649 | 1200 | 649 | 1200 |
Professional Inconel Fasteners Stockist providing custom solutions backed by superior material science.
| Media | Test temp. °F (°C) | Inconel Fastenrs | Concentration % by weight |
|---|---|---|---|
| Acetic acid | Boiling | <1 | 99 |
| Ferric chloride | Boiling | 7325 | 10 |
| Formic acid | Boiling | 9 | 88 |
| Hydrochloric acid | Boiling | 1 | 1 |
| Boiling | 353 | 1.5 | |
| 194 (90) | Nil | 2 | |
| Boiling | 557 | 2 | |
| 194 (90) | 72 | 2.5 | |
| Boiling | 605 | 2.5 | |
| Boiling | 642 | 10 |
| Standards | Country | Inconel 600 | Inconel 601 | Inconel 625 | Inconel X-750 | Inconel 718 | Inconel 800 |
|---|---|---|---|---|---|---|---|
| ASTM | America | ASTM B166 | ASTM B166 | ASTM F468 | ASTM B637 | - | ASTM B408 |
| ASME | Australia | ASME SB 166 | ASME SB 166 | ASME SF 468 | ASME SB637 | - | ASME SB 408 |
| UNS | North America | N06600 | N06601 | N06625 | N07750 | N07718 | N08800 |
| WNR | Russia | 2.4816 | 2.4851 | 2.4856 | 2.4669 | 2.4668 | 1.4876 |
| JIS | Japan | NCF 600 | NCF 601 | NCF 625 | - | - | NCF 800 |
| BS | United Kingdom | NA 14 | NA 49 | NA 21 | - | - | NA 15 |
| DIN | German | 2.4816 | 2.4851 | 2.4856 | 2.4669 | 2.4668 | 1.4876 |
| GOST | Russia | МНЖМц 28-2,5-1,5 | XH60BT | ХН75МБТЮ | - | - | ЭИ670 |
| AFNOR | France | NC 15 FE11M | NC23FeA | NC22DNB4M | - | - | Z8NC32-21 |
| EN | Europe | NiCr15Fe | NiCr23Fe | NiCr22Mo9Nb | - | - | X10NiCrAlTi32-20 |
| AMS | United States | - | - | - | - | - | - |
| Grades | Element (% By Mass) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mo | Cr | C | Si | Ni | Fe | Cu | Nb | S | P | Al | Mn | B | Ti | Co | |
| 600 | - | 14.0-17.0 | 0.15 | 0.5 | 72.0 | 6.0-10.0 | 0.5 | - | 0.015 | - | - | 1.0 | - | - | - |
| 617 | 8.0-10.0 | 20.0-24.0 | 0.15 | 0.5 | 44.2-56.0 | 3.0 | 0.5 | - | 0.015 | 0.015 | 0.8-1.5 | 0.5 | 0.006 | 0.6 | 10.0-15.0 |
| 625 | 8.0-10.0 | 20.0-23.0 | 0.1 | 0.5 | 58.0 | 5.0 | - | 3.15-4.15 | 0.015 | 0.015 | 0.4 | 0.5 | - | 0.4 | 1.0 |
| 690 | - | 30 | 0.019 | 0.35 | 59.5 | 9.2 | 0.01 | - | 0.003 | - | 0.02 | 0.35 | - | - | - |
| 718 | 2.8-3.3 | 17.0-21.0 | 0.08 | 0.35 | 50.0-55.0 | Balance | 0.2-0.8 | 4.75-5.5 | 0.015 | 0.015 | 0.65-1.15 | 0.35 | 0.006 | 0.3 | 1.0 |
| X-750 | - | 14.0-17.0 | 0.08 | 0.5 | 70.0 | 5.0-9.0 | 0.5 | 0.7-1.2 | 0.01 | 0.4-1.0 | 1.0 | 2.25-2.75 | 1.0 | ||
A Inconel Fasteners Stockist of excellence-delivering consistent quality across every shipment.
| Inconel Grade | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|
| Alloy 600 | 95,000 Psi, 655 MPa | 45,000 Psi, 310 MPa | 40% |
| Alloy X-750 | 1267 MPa | 868 MPa | 25% |
| Alloy 800 | 655 MPa, 95000 psi | 310 MPa, 45000 psi | 45 % |
| Alloy 601 | 80,000 Psi, 550 MPa | 30,000 Psi, 205 MPa | 30% |
| Alloy 625 | 135,000 Psi, 930 MPa | 75,000 Psi, 517 MPa | 42.50% |
| Alloy 718 | 135,000 Psi, 30 MPa | 70,000 Psi, 482 MPa | 45% |
| Alloy 800H | 655 MPa, 95000 psi | 310 MPa, 45000 psi | 45 % |
| Alloy 800HT | 655 MPa, 95000 psi | 310 MPa, 45000 psi | 45 % |
| Grade | Density | Melting Point | Hardness (HB) |
|---|---|---|---|
| Inconel 600 | 8.47 g/cm3 | 1413 °C (2580°F) | ≤195 |
| Inconel 601 | 8.1 g/cm3 | 1411 °C (2571°F) | ≤220 |
| Inconel 625 | 8.4 g/cm3 | 1350 °C (2460°F) | ≤220 |
| Inconel 800 | 8.47 g/cm3 | 1413 °C (2580 °F) | 86 RB |
| Inconel 800H | 8.47 g/cm3 | 1413 °C (2580 °F) | 192(HB) |
| Inconel 718 | 8.2 g/cm3 | 1350 °C (2460°F) | ≤363 |
| Inconel X-750 | 8.28 g/cm3 | 1430°C | 302-363 BHN |
| Inconel 800HT | 8.47 g/cm3 | 1413 °C (2580 °F) | 302-363 BHN |
| Material | Inconel Alloy 600 | Inconel Filler Metal | Inconel Welding Electrode | ||
|---|---|---|---|---|---|
| Mean Linear Expansiona | 10-6 in/in-°F | 200°F | 7.4 | 6.7 | 7.6 |
| 300°F | - | 7.2 | 8 | ||
| 400°F | 7.7 | 7.6 | 8.1 | ||
| 500°F | - | 7.8 | 8.2 | ||
| 600°F | 7.9 | 7.9 | 8.3 | ||
| μm/m-°C | 93°C | 13.3 | 12.1 | 13.7 | |
| 149°C | - | 13 | 14.4 | ||
| 204°C | 13.9 | 13.7 | 14.6 | ||
| 260°C | - | 14 | 14.8 | ||
| 316°C | 14.2 | 14.2 | 14.9 | ||
| Temperature | Impact Strength | ||
|---|---|---|---|
| °C | °F | J | ft•lb |
| 21 | 70 | 66.2 | 48.8 |
| -79 | -110 | 63 | 46.5 |
| -196 | -320 | 57.2 | 42.2 |
1/2" X 80-UNC Full Double End Inconel Stud Bolt
M20 Inconel Zinc Hammer T Bolt
M12 X 75mm Inconel Flange Bolt
M10 Inconel Threaded Rod
M8 Inconel Stud Bolt
Inconel Alloy 20mm Washers
| Riyadh | Muscat | Dubai | Ras Al Khaimah |
|---|---|---|---|
| Al Jubail | Saudi Arabia | Al Khobar/ Abu Dhabi | Ajman |
| Fujairah | Sharjah | Armenia | Doha |
| Export to | Shipping Time in Days | Export to | Shipping Time in Days | Export to | Shipping Time in Days |
|---|---|---|---|---|---|
 New Zealand |
25 |  Philippines |
12 |  Qatar |
6 |
 Cyprus |
16 |  Europe |
19 |  Kenya |
19 |
 Lebanon |
14 |  Netherlands |
8 |  Singapore |
8 |
 Tanzania |
18 |  Algeria |
17 |  Russia |
22 |
 Vietnam |
10 |  Thailand |
10 |  Tunisia |
18 |
 Iraq |
12 |  UAE |
5 |  Oman |
5 |
 Australia |
20 |  Nigeria |
9 |  Indonesia |
9 |
It's a nickel-chromium superalloy, manufactured and stocked by us to ASTM B166 specifications.
It meets ASTM B166 and UNS N06600 for chemical composition, mechanical properties and dimensional tolerance.
We supply standard mill sizes ex-stock, with custom cutting available on request.
We stock and ship ex-Mumbai, India, with pan-India and international export delivery.
Price depends on size, quantity, form, heat-treatment condition and current raw-material market rates.