repeat">
Kanakratna Steelage Private Limited
Kanakratna Steelage Private Limited
KHETWADI, Mumbai, Maharashtra
GST No. 27AAECK9442R1ZP
08048967694 72% Response Rate
Send E-mail

MONEL K500 UNS NO 5500

Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F.

This nickel alloy is spark resistant and non-magnetic to -200° F. However, it is possible to develop a magnetic layer on the surface of the material during processing. Aluminum and copper may be selectively oxidized during heating, leaving a magnetic nickel rich film on the outside. Pickling or Monel K-500 Barsbright dipping in acid can remove this magnetic film and restore the non-magnetic properties

Characteristics of Monel K500

  • Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidizing mineral acids, salts and alkalis.
  • Excellent resistance to high velocity sea water
  • Resistant to a sour-gas environment
  • Excellent mechanical properties from sub-zero temperatures up to about 480C
  • Non-magnetic alloy

Applications of Monel K-500

  • Sour-gas service applications
  • Oil and gas production safety lifts and valves
  • Oil-well tools and instruments like drill collars
  • Oil well industry
  • Doctor blades and scrapers
  • Chains, cables, springs, valve trim, fasteners for marine service
  • Pump shafts and impellers in marine service
Request CallBack
  • Monel K-500 Round Bars (Uns N0.5500)
  • Monel K-500 Round Bars (Uns N0.5500)
  • Monel K-500 Round Bars (Uns N0.5500)
  • Monel K-500 Round Bars (Uns N0.5500)
Monel K-500 Round Bars (Uns N0.5500)
Get Best Quote

Monel K-500 Round Bars (Uns N0.5500)

Approx. Price: Rs 2,200 / KgGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity10 Kg
ShapeRound
GradeK 500
MaterialMonel K 500
Material GradeMonel K500 ,UNS N05500 ,DIN 2.4375 Round Bar
Usage/ApplicationIndustrial
Size/Diameter>4 inch
Size10MM TO 250
FinishingBright, Polished,Peeled & Black
Test CertificateAVAILABLE
I Deal InNew Only


MONEL K-500

UNS N05500

Other common names: Alloy K500

Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400.

Corrosion Resistant Monel K-500

The corrosion resistance of alloy K-500 is substantially equivalent to that of alloy 400 except that when in the age-hardened condition, nickel alloy K-500 has a greater tendency toward stress-corrosion cracking in some environments. Monel K-500 has been found to be resistant to a sour-gas environment. The combination of very low corrosion rates in high-velocity sea water and high strength make alloy K-500 particularly suitable for shafts of centrifugal pumps in marine service. In stagnant or slow-moving sea water, fouling may occur followed by pitting but this pitting slows down after a fairly rapid initial attack.

Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidizing mineral acids, salts and alkalis.· Excellent resistance to high velocity sea water · Resistant to a sour-gas environment · Excellent mechanical properties from sub-zero temperatures up to about 480C · Non-magnetic alloy

  C MN S Si Ni Cu Al Fe Other

0.25 Max 1.5 Max 0.01 Max 0.5Max 63.00 Min 27-33 Max 2.3 3.15 2.0 Max 

 

Applications of Monel K-500
Sour-gas service applications · Oil and gas production safety lifts and valves · Oil-well tools and instruments like drill collars · Oil well industry · Doctor blades and scrapers · Chains, cables, springs, valve trim, fasteners for marine service · Pump shafts and impellers in marine service

Fabrication with Monel K-500 - Heavy machining of this alloy is best accomplished when the material is in the annealed condition or hot-worked and quenched condition. Age-hardened material however can be finish-machined to close tolerances and fine finishes. Therefore, the recommended practice is to machine slightly oversize, age-harden, then finish to size. During aging, a slight permanent contraction takes place, but little warpage occurs because of the low temperatures and slow cooling rates involved.

We can produce Monel K-500 bars as per the standard

As per heat treatment of Monel K-500 bars, we can do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

Our Monel K-500 bars are 100% ultrasonic tested.

In order to control the quality of Monel K500 bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, etc.

As per surface finish of Monel K-500 bars, we can supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Please tell us the size and quantity of Hex bars ,Round bars, Rods, that you need, we will be glad to quote the best price for you

Except Monel K-500 bars,we can also produce Monel K-500 flanges,Monel K-500 plates,Monel K-500 fastener,Monel K-500 bolts,Monel K-500 pipe fittings,Monel K-500 pipes,Monel K-500 tubes,Monel K-500 springs.


Additional Information:
  • Item Code: K500
  • Production Capacity: 100 Tons in Ready Stock
  • Delivery Time: 2-5 Days
  • Packaging Details: Export Worthy Packing
Yes! I am interested
Request CallBack
  • Monel K500 Hex Bars (UNS No N05500)
  • Monel K500 Hex Bars (UNS No N05500)
  • Monel K500 Hex Bars (UNS No N05500)
  • Monel K500 Hex Bars (UNS No N05500)
  • Monel K500 Hex Bars (UNS No N05500)
  • Monel K500 Hex Bars (UNS No N05500)
Monel K500 Hex Bars (UNS No N05500)
Get Best Quote

Monel K500 Hex Bars (UNS No N05500)

Approx. Price: Rs 2,000 / KgGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity5 Kg
BrandImported
MaterialMonel k 500
Material GradeMonel k 500
Usage/ApplicationManufacturing
Gradek500
Size10mm - 300mm
Finishingpeeled,bright
UsageManufacturing,Industrial,Pumps,valves

KANAKRATNA STEELAGE is one of the largest exporter, manufacturer and supplier of Monel Alloy K500 Hex Bars . Monel K500 Hex Bars is a nickel-copper alloy, precipitation hardenable in the course of additions of titanium and aluminium. Monel K500 Hex Bars (Monel K500 Rods) retains the outstanding corrosion resistant characteristics of Monel 400 and has better strength and hardness after precipitation hardening when compared with Alloy 400. Monel Alloy K500 Rods is particularly well suited for centrifugal pumps in the marine industry because of its high strength and low corrosion rates in high-velocity seawater.

K500 Monel Alloy Hex Bars Specification

Specification : ASTM B 865 / ASME SB 865 / AMS 4676 / QQ N 286

Dimensions : ASTM, ASME and API

Size : 6 mm to 120 mm.

Diameter : 3.17mm to 350mm diameter

Length : 100 mm to 3000 mm Long & Above

Finish : Bright, Polish & Black

Grade : Monel K500 (UNS No. N05500)

Form : Square , Round , Hex , Flat, Wire In Black & Bright Finish

Our Monel K500 Round Bars conforms to NACE MR0175/ISO 15156

 

ASTM B865 Monel K500 Bar Equivalent Grades

 

STANDARD

WERKSTOFF NR.

UNS

Monel K500

2.4375

N05500



Monel Alloy K500 Round, Bright, Hex, Threaded Bar Chemical Composition

 

Grade

Ni

Fe

C

Mn

Si

Cu

Al

S

Ti

Monel K500

63.0 min

0.5 – 2

0.25 max

1.5 max

0.5 max

27.0 – 33.0

2.3 – 3.15

0.010 max

0.35 – 0.85



K500 Monel Alloy Hex Bars Mechanical Properties

 

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.44 g/cm3

1350 °C (2460 °F)

Psi – 160000 , MPa – 1100

Psi – 115000 , MPa – 790

20 %



Types Of Available Products AISI, ASTM, DIN, JIS, GB, EN Monel Alloy K500 Hex Bars

Monel Alloy K500 Rods
K500 Monel Round Bars
ASTM B865 Monel K500 Bars
Monel UNS N05500 Round Bars
ASTM B865 K500 Alloy Monel Rods Manufacturer
B865 K500 Monel Alloy Polish Bars Manufacturer
Alloy K500 Monel Black Bars Distributors
Top Quality High Monel K500 Alloy Spring Steel Bars
Monel Alloy K500 Bright Bar Exporter
ASME SB 865 Monel K500 Forged Round Bars

 

K500 Monel Threaded Bars Stockiest in India
Monel Alloy K500 Cold Drawn & Polished Square Bars
Austenitic ASTM Bright K500 Alloy Monel Bar
AMS 4676 Monel K500 Alloy Round Bars
K500 Monel Alloy Hexagon Bars Dealers
Monel K500 Alloy Cold Drawn Bars Stockholder
High Speed Steel Monel K500 Hollow Bar Suppliers
ASME, ASTM, EN, BS, GB, Monel Alloy K500 Flat Bars
Monel Alloy Werkstoff 2.4375 Round Bar
Cold Rolled Monel Alloy K500 Rods

 


Additional Information:
  • Production Capacity: 100 tons
  • Delivery Time: 5-7 days
  • Packaging Details: export worthy packing
Yes! I am interested
Request CallBack
  • Monel K 500 Pipes
  • Monel K 500 Pipes
  • Monel K 500 Pipes
  • Monel K 500 Pipes
  • Monel K 500 Pipes
Monel K 500 Pipes
Get Best Quote

Monel K 500 Pipes

Approx. Price: Rs 3,450 / KgGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity10 Kg
Single Piece Length3 meter
GradeK500
MaterialMONEL K 500 UNS NO5500
Usage/ApplicationChemical Handling
ShapeRound
Surface FinishingPolished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror fi
EndThreaded, Plain End, Beveled End
RangeSeamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW Monel K500
Is It ISO CertifiedISO Certified
Tensile StrengthPsi - 160000 , MPa - 1100
Min Diameter5.0 - 1219.2 mm
Light SourceAll ASTM B165 Monel K500 Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat N
LengthDouble Random, Single Random, Standard & Cut length Pipe
BrandIMPORTED
Monel WERKSTOFF NR. 2.4375 Pipe has been found to be resistant to a sour gas environments, which is why the alloy has been used in sour wells. A very low rate of corrosion in combination with  high velocity sear water as well as a higher tensile strength property makes the ASTM B163 Monel K500 Seamless Pipe particularly well suited for use in centrifugal pumps in marine environment  applications.
The corrosion resistance properties  of K500 Alloy Seamless Pipe is substantially equivalent to that of its predecessor i.e. -  alloy 400. Monel K500 EFW Pipe has approximately two times the tensile strength if compared with Monel 400.Additionally, the K500 Alloy EFW Pipe can be further strengthened by conducting a cold working process prior to precipitation hardening the alloy. The tensile strength of this nickel based Monel K500 Hollow Pipe can be maintained up to a temperature of 1200° F but, the Monel ® K500 Pipe stays ductile and tough right down to temperatures of about 400° F. The melting range of the Monel K500 Hexagonal Pipe is between a temperature of 2400 ° F -2460° F.

One exception to be noted is that when the material is in an age hardened condition, K500 Monel Bush Hex Pipe has a greater tendency toward getting attacked by  stress induced corrosion cracking in some environments.In stagnant or slow moving sea water,  bio fouling may occur and the UNS N05500 Welded Pipe is attacked by pitting. However, pitting of K500 Alloy Seamless Pipe slows down after a fairly rapid initial attack.
 
This nickel based monel k500 pipe is spark resistant.  Up to a temperature of -200° F, the K500 Monel Welded Pipe exhibits non-magnetic behaviour. However, it is possible to develop a magnetic layer on the surface of the Monel DIN NR. 2.4375 Pipe during its processing. When elements Aluminium and copper have been selectively oxidized during the heating process, they leave a magnetic nickel rich film on the surface or outside the K500 Monel Welded Pipe. One can remove this nickel rich, magnetic film and restore the non-magnetic properties of the Monel Alloy K500 Round Pipe by either pickling or bright dipping in acid.

Monel K500 Pipe Chemical Composition
GradeCMnSiSCuFeNiCr
Monel K5000.25 max1.50 max0.50 max0.010max27.00 – 33.00max0.5 – 263.00 min

 

Monel K500 Pipe Mechanical Properties
Alloy K500 ElementAlloy K500 DensityAlloy K500 Melting PointAlloy K500 Tensile StrengthAlloy K500 Yield Strength (0.2%Offset)Elongation
Monel K5008.44g\cm31350 °C (2460 °F)Psi – 160000 , MPa – 1100Psi – 115000 , MPa – 79020%

 


Additional Information:
  • Production Capacity: 25 TONS
  • Delivery Time: DEPENDS ON ORDER QUANTITY
  • Packaging Details: EXPORT WORTHY PACKING
Yes! I am interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Monel K500 Fittings
Get Best Quote

Monel K500 Fittings

Approx. Price: Rs 4,400 / PieceGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity1 Piece
Usage/ApplicationPneumatic Connections
MaterialMonel
Size3/4 inch, 2 inch, 1/2 inch, 1 inch, 3 inch
ApplicationHydraulic Pipe, Structure Pipe, Gas Pipe
Thread SizeStandard

KanakRatna is the leading manufacturer and exporter of a high quality range of Monel K500 Spare Parts, which are made of high quality raw material. Furthermore, in order to cater to the divergent demands of the clients, we have made the offered products in two different grades; Monel 400 (UNS No. N04400) and Monel 500 (UNS No. N05500) in form of pipes, fittings, flanges, sheet, plates, tubes, coils, rod and fasteners, both in precut and in custom forged.

 

Features:

  • Dimensional stability
  • Dimensional accuracy
  • Sturdy construction
  • Resistance against corrosion
  • Longer service life

Additional Information:
  • Delivery Time: depends on order
  • Packaging Details: export Worthy Packing
Yes! I am interested
X