Kanakratna Steelage Private Limited
KHETWADI, Mumbai, Maharashtra
GST No. 27AAECK9442R1ZP
08048967694 70% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- Nickel 200,201
Nickel
Commercially pure or low-alloy nickel has characteristics that are useful in several fields, notably chemical processing and electronics. Nickel is highly resistant to various reducing chemicals and is unexcelled in resistance to caustic alkalies. Compared with nickel alloys, commercially pure nickel has high electrical and thermal conductivity. It also has a high Curie temperature and good magnet ostrictive properties. Annealed nickel has a low hardness and good ductility and malleability. Those attributes, combined with good weldability, make the metal highly fabricable. Nickel has a relatively low work-hardening rate, but it can be cold worked to moderately high strength levels while maintaining ductility.
Nickel 200 (UNS N02200) is commercially pure (99.6%) wrought nickel. It has good mechanical properties and excellent resistance to many corrosive environments. Other useful features of the alloy are its magnetic and magnetostrictive properties, high thermal and electrical conductivities, low gas content and low vapor pressure. Chemical composition is shown in Table 1. The corrosion resistance of Nickel 200 makes it particularly useful for maintaining product purity in the handling of foods, synthetic fibers, and caustic alkalies; and also in structural applications where resistance to corrosion is a prime consideration. Other applications include chemical shipping drums, electrical and electronic parts, aerospace and missile components.
Nickel 201 (UNS N02201) is the low-carbon version of Nickel 200. Composition is shown in Table 28. Typical applications are caustic evaporators, combustion boats, plater bars, and electronic components. Nickel 201, because of its low base hardness and lower work-hardening rate, is particularly suited for spinning and cold forming. It is preferred to Nickel 200 for applications involving exposure to temperatures above 600°F (315°C).
Applications:
| Technique | Hot Rolled |
| Grade | Nickel Base Alloy, |
| Type | Nickel Plate |
| Packaging | wooden case |
| size | According to your need |
| Usage/Application | Industrial |
| Surface Treatment | Coated |
| Material | Nickel Alloy |
| Thickness | 0.2-200mm |
| Size | Standard |
| Length | 3 meter |
| Material | Nickel 201 |
| Single Piece Length | 18 meter, 3 meter, 6 meter |
| Color | Silver |
| Brand | Kanakratna Steelage |
Nickel 200 or Ni 200 is 99.6% commercially pure wrought nickel. Nickel 200 has excellent resistance to many corrosive environments and good mechanical properties . Other useful features of Nickel 200 are its magnetic and magnetostrictive properties, low gas content,high thermal and electrical conductivities and low vapor pressure.
Nickel 201 or Ni 201 is the low-carbon version of Nickel 200 . The Nickel 201 has the similar characteristics as the Nickel 200
Pipes & Tubes
Sheets & Plates
Bars & Rods
Fitting & Flanges
Wires
Chemical Composition
| Ni | Fe | C | Mn | Si | Cu | Mg | Ti | S | |
| Nickel 200 | 99.0 min | 0.4 max | 0.15 max | 0.35 max | 0.1 max | 0.25 max | 0.01 max | ||
| Nickel 201 | 99.0 min | 0.4 max | 0.02 max | 0.35 max | 0.2 max | 0.25 max | 0.15 max | 0.1 max | 0.01 max |
*Your information is safe with us.
| Application | Utilities Water, Drinking Water, Chemical Handling |
| Single Piece Length | 3 meter, 6 meter, 18 meter |
| Size/Diameter | 3 inch, 1 inch, 2 inch, 1/2 inch |
Nickel 200 is 99.6% tough metals that can be found on the earth's surface. This metal has excellent mechanical properties such as low gas content, high thermal and electrical conductivity. Owing to these properties as well as its chemical composition, Nickel 200 is highly resistant to corrosive environment and corrosion by neutral and alkaline salt solutions. It corrodes at a low rate in neutral and distilled water. This Nickel 200 is extremely useful in any environment below 600° F. We offer this nickel 200 in various forms like wire , Round bar, Forged bar , hex bar , Flat bar , Circles , Ring , Tube , seamless Pipe , Welded / ERW Pipe , Sheet , Plate , Coil , Flanges , fasteners , Socket weld Fittings , ferrule fittings , Buttweld fittings Like cap , elbow , tee , Reducer. Our Nickel 200 Sheet, Nickel 200 Plate and nickel 200 products are available in pure (99.2%) wrought nickel with good mechanical properties and resistance to a range of corrosive media.
Nickel 200/UNS N02200 is available in Nickel 200 wire , Nickel 200 Round bar, Nickel 200 Forged bar , Nickel 200 hex bar , Nickel 200 Flat bar , Nickel 200 Circles , Nickel 200 Ring , Nickel 200 Tube , Nickel 200 seamless Pipe , Nickel 200 Welded / ERW Pipe , Nickel 200 Sheet , Nickel 200 Plate , Nickel 200 Coil , Nickel 200 Flanges , Nickel 200 fasteners , Nickel 200 Socket weld Fittings , Nickel 200 ferrule fittings , Nickel 200 Buttweld fittings Like cap , elbow , tee , Reducer.
The various Alloys The development of the Duplex stainless steels has continued, graded for their corrosion performance depending on their alloy content. Today, modern duplex stainless steel can be divided into four groups :
Chemical Analysis of Nickel 200 (UNS N02200)
Nickel 200. Nickel 99.2
C | MN | P | S | Si | Cr | Ni | Mo | Cu | Co | Cb +Ta | Fe | other |
.15 max | .35 max |
| .01 max | .35 max |
| 99.0 max |
| .25 max |
|
| 0.40 |
|
Specifications
International Specifications | Nickel 200 Sheet / Plate | Nickel 200 Round Bar | Nickel 200 Pipe | Nickel 200 Tube | Nickel 200 Fittings | Nickel 200 Forgings |
BS 3072, BS 3073, BS 3074, BS 3075, BS 3076, NA11 | ASME SB-168 | ASME SB-160 | ASME SB-161 ASME S B-829 ASME SB-775 ASME SB-725 | ASME SB-161 ASME SB-163 ASME SB-730 ASME SB-751 | ASME SB-366 | ASME SB-564 |