Titanium Grade 5 Round Bar is made up of a titanium alloy that has aluminum and vanadium as additions in the composition. The material has very high corrosion resistance properties and this is the most used grade of titanium alloys. KANAKRATNA STEELAGE is a leading manufacturer and supplier of theTitanium Grade 5 Round Barproducts in various sizes, shapes and types. The composition has 90% titanium with carbon, iron, oxygen and 6% aluminum with 4% vanadium. This material composition gives the products 950MPa minimum tensile strength and 880MPa minimum yield strength. The specification for this grade is ASTM B348.
TheASTM B348 Gr 5 Rodalso has a very high melting point of 1662 degrees Celsius. The dimensions vary according to the EN, DIN, JIS, ASTM, BS, ASME and AISI standards. The width of the bars ranges from 5mm to 500mm, the diameter ranges from 0.1mm to 100mm and the length ranges from 100mm to 3000mm and custom lengths as well. TheGrade 5 Titanium Flat Barand others can have black, bright, rough turned and many other types of finishes. There are also other forms such as hexagon and square rods and bars.
TheUNS R56400 Titanium Hex Baris strong due to the geometrical shape of it and it is used in structural applications. Sometimes the weight and shape matter in applications and theTitanium Grade 5 Square Barcan also be used for strength reasons. The applications include heat exchangers, power generation plants, pharmaceuticals, petrochemicals, chemical processing industries, offshore oil drilling applications and more. There are also special ends like theTitanium ASTM B348 Grade 5 Threaded Rodwhich has a threaded end to connect with other threaded fittings and flanges.
ASTM B348 Gr 5 Rod Material Specification
Specifications Chart | ASTM B348/ ASTM SB348 |
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Size in mm
| 5 mm To 500 mm |
Diameter in mm | 0.1 mm to 400 mm |
Length in mm | 100 mm To 3000 mm Long & Above |
Surface Finish | Black, Bright Polished, Rough Turned, Matt Finish |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |